- Press
button to start the operation. - Press
to
select operation mode. Each press
changes mode in the following order:
- Press
or 
to set the temperature.
Each press raises or lowers the temperature by 1°C.
Note:
Press to
stop the operation. The same setting is selected the next time by simply pressing
.
| Indication | Operation state | Room temperature |
|---|---|---|
 |
The unit is operating to reach the set temperature | About 2°C or more away from set temperature |
|
The room temperature is approaching the set temperature | About 1 to 2°C from set temperature |
I FEEL mode
The unit selects the operation mode according to the room temperature when I FEEL is selected. When the room temperature is higher than 25°C, COOL is selected (set temperature: 24°C). When the room temperature is lower than 25°C, DRY is selected. However, when operation is stopped and then started within 2 hours, the mode which has been selected previously is operated.
Note:
During COOL operation, the set temperature may not be changed when the room temperature is more than 2°C higher than the set temperature. In this case, please wait until the room temperature drops to within 2°C of the set temperature.
COOL mode
Enjoy cool air at your desired temperature.
DRY mode
Dehumidify your room. The room may be cooled slightly. Temperature cannot be set during DRY mode.
FAN mode
Circulate the air in your room.
Selecting operation modes
- Press
button to start the operation.
- Press
to
select operation mode. Each press
changes mode in the following order:
- Press
or
to set the temperature.
Each press raises or lowers the temperature by 1°C.
Note:
Press to
stop the operation.
The same setting is selected the next time by simply pressing
.